- Blog


This blog is deprecated since July 2020.The articles below are no longer maintained and might contain outdated information. 
You can find the most acutal and relevenat information in our Knowledge Base at Blog


Hello and welcome to our blog! What can we do for you? Are you looking for further technical information or step-by-step instructions to our products? Or would you like to read the latest news on mscrm-addons? Please feel free to browse our blog for detailed information and to share our posts!

How to insert Condition Fields in DocumentsCorePack Template Designer

Certain properties of DocumentsCorePack templates consist of conditions based on Dynamics 365 fields. The Condition field property allows you to define dynamic content that is either displayed or removed from the final document based on a certain condition. 

This step-by-step description will show you how to set conditions in DocumentsCorePack Template Designer. In this example, we want to create a quote and choose between Mr and Ms depending on the gender of the recipient. 

Step 1: Create a quote template
First, we need to create the basic layout of the template. Clicking on the [Insert MailMerge Fields]-button in the command bar will open the DocumentsCorePack Designer on the right side. More information about how to create DocumentsCorePack templates can be found here

The figure below shows an example template of a quote.  


Step 2: Use the Condition field option
After creating your template, please set the cursor at the position where you would like to insert a condition field. In our example, we want to set the condition in the subject line after "Dear" choosing between Mr and Ms based on the recipient like you can see highlighted in yellow in the figure above. Then, go to Insert Computed Item and select Condition field. 

Step 3: Configure the setup of your condition fields 


❶ Give your condition a descriptive name. It makes it easy to re-use existing conditions in a template.

Enable the creation of an else block and define the layout of the inserted condition fields - in this case next to each other. 

 Use the condition designer to create your condition. In this example, we want to create the condition for the entity "Primary Contact (Contact)". We want our condition to choose between Mr and Ms depending on the gender of the recipient. Therefore we select in the first drop-down menu the field Gender and as operator equals. Depending on the data type of the field you either have an additional control that opens a new dialog to select the compare value - in this case, Male.  

A more detailed description of the condition designer can be found here.

Below you can see placeholders for the formatting options next to each other. Because you selected to insert an "ELSE" block you have the second placeholder like you can see in the figure below. 


Step 3: Set your custom text block 
Within these placeholders, you can now enter the content of your conditions. In this example, IF Gender equals to Male it should display "Mr" and ELSE "Ms".

Step 4: Save your template
Before you can use or test your template you have to save it. Either you save your template locally with the standard Save or Save as the functionality of Word or you use the Save template-option of the DocumentsCorePack client in order to publish the template to Dynamics 365.

Step 5: Test your template
As you have made changes to your template you might want to test them quickly. A step by step description of how to test your template can be found here. Below you can see the result of your created template containing the condition we set, highlighted in yellow. 

That’s it! We appreciate your feedback! Please share your thoughts by sending an email to


Comments are closed.